Click Here To View Our Full Range Of Disney Stickers

Personally, I love combining my Disney stickers with photos I have taken at Disneyland or Disney World, but there are so many more things you can do with them. Here are just some of the fabulous ideas I found while looking around EK Success’s official website.

Artist: Kara Ward

This layout uses EK Success’s 3D Tinkerbell Poses stickers to embellish a beautiful photo of a young girl dressed as Tinkerbell. While this photo was taken at Disneyland, the layout could easily be adapted to suit any photos of your kids dressed as their favourite characters. I particularly love how the Tinkerbell stickers have been layered over the swirls and flowers.

Artist: Dana DeCarlo

This layout uses Glitter Disney Princesses stickers and shows how you can use stickers of your favourite Disney Princesses to embellish photos of your own little princesses. Also, placing each sticker inside a circle adds a bit of style to your page while still focusing attention on your photos.

Artist: Karen Bulmahn

Disney stickers can also be used to showcase your child’s favourite characters or stars, as in this layout featuring Disney’s Camp Rock and EK Success’s 3D Camp Rock stickers.

These are just three of many different ideas for incorporating Disney stickers into your scrapbooking layouts and projects. Choose your favourites and have some fun.

Click Here To View Our Full Range Of Disney Stickers

I’d love to hear what you think of these Disney stickers ideas. Please leave a comment in the comments box below.

Related Posts:

• Mickey Mouse Stickers
• 3D Tinkerbell Stickers
• Disney Stickers
• Showcasing Your Photos With Scrapbooking Ideas
• Zoo Stickers

The Original Post is Located Here: New Disney Stickers

Click Here To View Our Range Of Disney Stickers

Materials Used: Black cardstock, Sandylion Mickey Poses paper, Junkitz Basics Circle Black paper, Beary Patch Sunbeary Dot paper, red cardstock, black ink, a white pen, Disneyland Alphabet stickers and Sandylion Mickey Mouse Foam stickers.

To recreate this Mickey Mouse scrapbooking idea, follow these steps:

1. Cut a piece of black cardstock measuring 21.6cm by 28cm. This will be your background.

2. Use a white pen to draw a border around the edges of your black cardstock. I have used a combination of dots and dashes, but you can draw whatever type of border you wish.

3. Cut a piece of Sandylion Mickey Poses paper measuring 16cm by 22.5cm. Lightly ink the edges with black ink. When dry, glue to the left side of your page approximately 0.8cm from the left edge and 2.7cm from the top edge.

4. Cut a piece of Junkitz Basics Circle Black paper measuring 5.8cm by 24.4cm. Lightly ink the edges with black ink. When dry, glue down the left side of your page approximately 3.2cm from the left edge and 1.7cm from the top edge.

5. Cut a piece of Beary Patch Sunbeary Dot paper measuring 10cm by 9cm. Lightly ink the edges with black ink. When dry, glue on the right side of your page approximately 0.8cm from the right edge and 8.3cm from the top edge.

6. Mat a horizontal 4×6 photo with red cardstock and glue to your page approximately 1.5cm from the right edge and 3.3cm from the bottom edge.

7. Crop a vertical 4×6 photo so it is approximately 9cm by 12.5cm. Mat with red cardstock and again with black cardstock. Glue to your page approximately 1.6cm from the left edge and 3.5cm from the top edge.

8. Select three foam stickers (I have used Mickey Mouse, Pluto and red Mickey ears) and position around your page, as shown above.

9. Finish off your page by using alphabet stickers of your choice to write your title in the remaining space on your yellow paper.

You now have a cheerful Disney scrapbooking page using Mickey Mouse stickers that can’t help but make you smile.

Click Here To View Our Range Of Disney Stickers

I’d love to hear your thoughts and ideas for using Mickey Mouse stickers on your layouts and what you think of this page. Please leave a comment in the comments box below.

Related Posts:

• 3D Tinkerbell Stickers
• Disney Stickers
• New Disney Stickers
• Fun Paint Splats
• Disney Scrapbooking Stickers

The Original Post is Located Here: Mickey Mouse Stickers

Click Here To View Our Range Of Disney Stickers

I love the way Sandylion’s 3D stickers pop out of the page at you. They make your page look so sophisticated and create a truly dimensional layout. But they are not too heavy and bulky so you can sprinkle them around your layout to create the sensational look of 3D without weighing your page down.

Materials Used: Purple cardstock, Hunter Leisure Disney Castle paper, Provo Craft Dots paper, Provo Craft Pink Swirls paper, blue Bazzill cardstock, pink Bazzill cardstock, white cardstock, corner rounder, purple alphabet stickers (2 sizes) and Sandylion 3D Tinkerbell stickers.

To recreate this scrapbook page idea, follow these steps:

1. Use the purple cardstock as your background.

2. Cut a piece of Hunter Leisure Disney Castle paper measuring 10.6cm by 29cm. If you don’t have this paper, any paper will do. However, I do recommend you choose a paper with a dominant pattern you like as it will become a main feature of your page.

Using a corner rounding punch, round the top right and bottom right corners of your page. Glue vertically to your page approximately 7mm from the right edge and 7mm from the bottom edge.

3. Cut a piece of Provo Craft Dots paper measuring 17.8cm by 4.4cm. Using a corner rounding punch, round the top left corner. Glue horizontally in the top left corner of you page approximately 7mm from the left edge. Make sure the top edge is inline with the top edge of your castle paper from Step #2.

4. Mat a horizontal 4×6 photo with white cardstock. Glue to your page 7mm below your dots paper from Step #3. Make sure the right edge of your photo and the right edge of your dots paper are inline with each other.

5. Cut a piece of Provo Craft Pink Swirls paper. The exact dimensions will depend on your photo. The height should be the same as your matted photo. The width should be the distance from the left edge of your page to the right edge of your photo mat minus 1.4cm.

Glue vertically next to your photo so that the left edge is inline with the left edge of the dots paper above it and the top and bottom edges are inline with the top and bottom edges of your photo mat.

6. Cut a piece of blue Bazzill cardstock measuring 17.8cm by 4.3cm. Glue horizontally 7mm below your photo mat. Make sure the right edge is inline with the right edge of your photo mat.

7. Using purple alphabet stickers, write your title in the centre of your blue Bazzill cardstock.

8. Cut piece of pink Bazzill cardstock measuring 17.8cm by 4.8cm. Glue horizontally 7mm below your blue cardstock. Again, make sure the right edge is inline with the right edge of your photo mat.

9. Write your journaling on the pink Bazzill cardstock.

10. Cut a piece of Provo Craft Dots paper. It should be 17.8cm wide, but the height will depend on you. The height should be the distance from the bottom of the page to the bottom edge of your pink cardstock minus 1.4cm.

Using a corner rounding punch, round the bottom left corner and then glue horizontally to your page approximately 7mm from the bottom edge. The bottom edge should be in line with the bottom edge of your castle paper and the left edge should be inline with the left edge of the pink cardstock above it.

11. Finish of your page by placing your 3D Tinkerbell stickers in key positions, as shown in the scrapbooking layout above.

And voila! A magical layout complete with 3D Tinkerbell stickers. This concept can easily be adapted to suit any theme or photos you wish. Have a go and have some fun!

Click Here To View Our Range Of Disney Stickers

I’d love to hear your thoughts and ideas for using 3D Tinkerbell stickers on your layouts. Please leave a comment in the comments box below.

Related Posts:

• Mickey Mouse Stickers
• Fun Paint Splats
• Disney Stickers
• New Disney Stickers
• Train Stickers

The Original Post is Located Here: 3D Tinkerbell Stickers

Of course, you don’t have to use Disney stickers with photos from Disneyland. You could also use them with photos of your kids playing, your child’s favourite toys, your child entering an imaginary world while reading or even friends goofing around.

Click Here To View Our Range Of Disney Stickers

This layout was created using Junkitz Home Bouquet paper, Foofala Paper Stencil paper, Scrap Ease Purple Argyle paper, Red Weave paper (brand unknown), white cardstock, black cardstock, black ink and EK Success 3D Alice In Wonderland stickers.

To recreate this scrapbook page idea, follow these steps:

1. Use the Junkitz Home Bouquet paper as your background. Ink the edges with black ink and set aside to dry.

2. Cut a strip of Foofala Paper Stencil paper approximately 18cm wide. Following the shapes of the diamonds, cut a decorative edge down the left side. Alternatively, if you are not confident doing this, you could use decorative edged scissors to cut a fancy edge down the left. Ink the edges with black ink and when dry, glue vertically to your page approximately 1.2cm from the left edge.

3. Cut a strip of Scrap Ease Purple Argyle paper approximately 6.8cm wide. Ink the edges with black ink and when dry, glue vertically to your scrapbooking page approximately 4.5cm from the left edge.

PLEASE NOTE: The splash of purple (a royal colour) adds a sense of formality and sophistication to your scrapbooking page and is perfect for tying your colourful photos in with what would otherwise be a fairly restrained colour palette. It also helps showcase your Disney stickers.

4. Cut a piece of Red Weave paper measuring 24cm by 13cm. Tear along the bottom edge for added interest. I recommend tearing up from left to right so that the left side of your paper is bigger than the right side. Ink the edges with black ink and when dry, glue horizontally to your page approximately 5.6cm from the left edge and 10.2cm from the top edge.

5. Mat two vertical 4×6 photos and one horizontal 4×6 photo with white cardstock.

6. Glue your horizontal photo in the bottom left corner of your page approximately 3cm from the left edge and 2.2cm from the bottom edge.

7. Glue one of your vertical photos in place approximately 1.3cm from the right edge and 5.2cm from the bottom edge.

DO NOT GLUE YOUR THIRD PHOTO IN PLACE YET!

8. Cut out a large heart shape from black cardstock. It should be about 11cm wide and 10.5cm tall. Ink the edges with black ink and when dry, glue in place, as shown in the layout above. The bottom of the heart should cover the top left corner of your vertical photo from Step #7 and most of the left side of the heart will later be hidden behind your second vertical photo (which has not yet been glued in place).

9. Cut out a second, smaller heart shape from black cardstock. It should be about 6.5cm wide and 5.5cm tall. Ink the edges with black ink and when dry, glue in place, as shown in the layout above. The bottom of the heart should slightly overlap your horizontal photo from Step #6 and most of the right side of the heart will later be hidden behind your second vertical photo (which has not yet been glued in place).

10. Glue your second vertical photo above your horizontal photo so that the right edges of both photos are inline with each other.

11. Finally, decorate by placing your EK Success 3D Alice In Wonderland stickers around your layout, as shown above.

What do you think? Do you like this scrapbooking idea using Disney stickers? Do you have any questions? Would you have done anything different? We’d love to hear from you! Please leave a comment below.

Click Here For More Scrapbooking Ideas

Related Posts:

• Mickey Mouse Stickers
• 3D Tinkerbell Stickers
• New Disney Stickers
• Fun Paint Splats
• Disney Scrapbooking Stickers

The Original Post is Located Here: Disney Stickers